Features

1. Rapid: 50-500℃ in second cut and shape all foam easily!

2. Light: Suitable weight for you to operate, fit for DIY or workers
3. Smooth: There will be no rough edges after cutting, easy to install and run!
4. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
5. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 250W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Suitable Blade Length: 10in/25cm
Width: 0.55in/1.4cm
Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Red

Package Included

1 x Hot Knife Cutter 250W
1 x Straight Blade 10in/25cm
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 3-5 minutes of work let the blades cool down for 60 seconds. For more information, please read the instruction manual.

PDF

The post 10 Inch Hot Knife Cutter 250W – HK250 appeared first on Cutdome™ Hot Knife.

* Note: This blade is for 250W hot knife only. In order to ensure the effectiveness and safety of use, different power of the hot knife must be matched with the specified specifications of the blade.

Application

For cutting fabric, leather, cable, sponge, foam, plastic, etc. 

Specification

Material: alloy
Length: 10in/25cm
Width: 0.55in/1.4cm
Thickness: 0.03in/0.08cm
Shape: Straight-shaped

Includes

1 x Straight Blade 10in/25cm

The post 10 Inch Straight Blade for 250W Hot Knife appeared first on Cutdome™ Hot Knife.

1. Continuous Heating: 24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. When used for a long time, the hot cutter can dissipate heat by air cooling, effectively reducing the damage caused by overheating and prolonging its service life.
2. Rapid: 50-500℃ in second cut and shape all foam easily!
3. Light: Suitable weight for you to operate, fit for DIY or workers
4. Smooth: There will be no rough edges after cutting, easy to install and run!
5. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
6. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation.

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 250W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Blade Length: 10in/25cm
Blade Width: 0.55in/1.4cm
Blade Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Blue

Includes

1 x Air Cooled Hot Knife Cutter 250W
1 x Straight Blade 10in/25cm
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Please read the instruction manual before use.

PDF

The post 10 Inch Air Cooled Hot Knife Cutter 250W – HKC250 appeared first on Cutdome™ Hot Knife.