Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA and so on.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 2in/5cm
Straight Blade Length: 4in/10cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Red

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Includes

1 x Hot Knife Cutter 150W
1 x Straight Blade 4in/10cm
1 x Small Slotted Plate
1 x 12in/30cm Bendable Blade*
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

Notice: You need to cut the 12in/30cm blade into two 6in/15cm sections to use. 

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 5 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Small Foam Grooving Hot Knife Kit – HK150G appeared first on Cutdome™ Hot Knife.

24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA, and so on.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 2in/5cm
Straight Blade Length: 4in/10cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Blue

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Includes

1 x Air Cooled Hot Knife Cutter 150W
1 x Straight Blade 10cm/4in
1 x Small Slotted Plate
1 x Bendable Blade 12in/30cm*
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

*Notice: You need to cut the 12in/30cm blade into two 6in/15cm sections to use. 

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 60 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Small Foam Grooving Air Cooled Hot Knife Kit – HKC150G appeared first on Cutdome™ Hot Knife.

1. Rapid: 50-500℃ in second cut and shape all foam easily.

2. Light: Suitable weight for you to operate, fit for DIY or workers
3. Smooth: There will be no rough edges after cutting, easy to install and run.
4. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models.
5. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation.
6. Warranty: We keep pursuing the 100% satisfaction of our customers. If for any reason you are not satisfied with your purchase, please contact us and we will provide the best solution for you very quickly.

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Blade Length: 4in/10cm
Blade Width: 0.55in/1.4cm
Blade Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: ≥ 118in/3m
Color: Red

Includes

1 x Hot Knife Cutter 150W
1 x Straight Blade 4in/10cm
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 3-5 minutes of work let the blades cool down for 60 seconds. For more information, please read the instruction manual.

PDF

The post 4 Inch Hot Knife Cutter 150W – HK150 appeared first on Cutdome™ Hot Knife.

1. Continuous Heating: 24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. When used for a long time, the hot cutter can dissipate heat by air cooling, effectively reducing the damage caused by overheating and prolonging its service life.
2. Rapid: 50-500℃ in second cut and shape all foam easily!
3. Light: Suitable weight for you to operate, fit for DIY or workers
4. Smooth: There will be no rough edges after cutting, easy to install and run!
5. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
6. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Suitable Blade Length: 4in/10cm
Blade Width: 0.55in/1.4cm
Blade Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Blue

Includes

1 x Air Cooled Hot Knife Cutter 150W
1 x Straight Blade 4in/10cm
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Please read the instruction manual before use.

PDF

The post 4 Inch Air Cooled Hot Knife Cutter 150W – HKC150 appeared first on Cutdome™ Hot Knife.