Features

• Straight and angle cuts
• Does not prevent the replacement of blades
• Auxiliary support for smooth and accurate cutting
• Measuring scale on the cutting guide for setting the correct size

The post Cutting Guide For Straight Blades appeared first on Cutdome™ Hot Knife.

Specification

Material: alloy
Weight: 0.1kg

Includes

2 x Engraving Presses

The post Engraving Presses for Bendable Blade 2 Pack appeared first on Cutdome™ Hot Knife.

*Notice: If you want to use in 150W hot knife (HK150 / HKC150), you need to cut this blade into two 6in/15cm sections to use. 

Specification

Material: alloy
Length: 12in/30cm
Width: 0.2in/0.5cm
Thick: 0.03in/0.08cm
Weight: 0.1kg

Includes

1 x 30cm Bendable Blade

The post 12″ Bendable Blade for 150W/200W Hot Knife appeared first on Cutdome™ Hot Knife.

Special for foam slotting. Power saving and easy to operate and special for foam slotting, long life span, no rough burr after cutting. The blade can be bent into any shape. Use with 150W hot knife cutter* (HK150).

* Note: This blade is for 150W hot knife only. In order to ensure the effectiveness and safety of use, different power of the hot knife must be matched with the specified specifications of the blade. Cut the 12in/30cm blade into two 6in/15cm sections to use.

Specification

Material: alloy
Blade length: 12in/30cm
Blade width: 0.2in/0.5cm
Blade thick: 0.03in/0.08cm
Weight: 0.4kg

Package Included

1 x Slotted Plate
1 x 12in/30cm Bendable Blade

The post Small Slotted Plate w/ Bendable Blade for 150W Hot Knife appeared first on Cutdome™ Hot Knife.

Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA and so on.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 2in/5cm
Straight Blade Length: 4in/10cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Red

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Includes

1 x Hot Knife Cutter 150W
1 x Straight Blade 4in/10cm
1 x Small Slotted Plate
1 x 12in/30cm Bendable Blade*
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

Notice: You need to cut the 12in/30cm blade into two 6in/15cm sections to use. 

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 5 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Small Foam Grooving Hot Knife Kit – HK150G appeared first on Cutdome™ Hot Knife.

Especially suitable for remove glue residue. Use with 100W hot knife cutter (HK100)*. 

* Note: This blade is for 100W hot knife only. In order to ensure the effectiveness and safety of use, different power of the hot knife must be matched with the specified specifications of the blade.

Application

For cutting fabric, leather, cable, sponge, foam, plastic, etc.

Specification

Material: alloy
Length: 1.89in/4.8cm
Thickness: 0.03in/0.08cm
Shape: Shovel-shaped

The post Shovel-shaped Blade for 100W Hot Knife appeared first on Cutdome™ Hot Knife.

Especially suitable for cutting plastic. Use with 100W hot knife cutter (HK100)*. 

* Note: This blade is for 100W hot knife only. In order to ensure the effectiveness and safety of use, different power of the hot knife must be matched with the specified specifications of the blade.

Application

For cutting fabric, leather, cable, sponge, foam, plastic, etc.

Specification

Material: alloy
Length: 2.16in/5.5cm
Thickness: 0.03in/0.08cm
Shape: Sharp-shaped

The post Sharp-shaped Blade for 100W Hot Knife appeared first on Cutdome™ Hot Knife.

Especially suitable for cutting cable. Use with 100W hot knife cutter (HK100)*. 

* Note: This blade is for 100W hot knife only. In order to ensure the effectiveness and safety of use, different power of the hot knife must be matched with the specified specifications of the blade.

Application

For cutting fabric, leather, cable, sponge, foam, plastic, etc.

Specification

Material: alloy
Length: 2.44in/6.2cm
Thickness: 0.03in/0.08cm
Shape: R-shaped

The post R-shaped Blade for 100W Hot Knife appeared first on Cutdome™ Hot Knife.

Special for foam slotting. Self-scaling, free adjustment, no other assistance, slotting width of up to 15CM, with a bendable blade you can open any shape of the slot. Power saving and easy to operate and special for foam slotting, long life span, no rough burr after cutting. The blade can be bent into any shape. Use with 200W hot knife cutter* (HK200)

* Note: This blade is for 200W hot knife only. In order to ensure the effectiveness and safety of use, different power of the hot knife must be matched with the specified specifications of the blade.

Specification

Material: alloy
Maximum width of slotting: 6in/15cm
Blade length: 12in/30cm
Blade width: 0.2in/0.5cm
Blade thick: 0.03in/0.08cm
Weight: 0.5kg

Package Included

1 x Slotted Plate
1 x 12in/30cm Bendable Blade

The post Large Slotted Plate w/ Bendable Blade For 200W Hot Knife appeared first on Cutdome™ Hot Knife.

Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA and so on.

Self-scaling, free adjustment, no other assistance, slotting width of up to 6in/15cm, with a bendable blade you can open any shape of the slot. Power saving and easy to operate and special for foam slotting, long life span, no rough burr after cutting. The blade can be bent into any shape.

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 200W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 6in/15cm
Straight Blade Length: 6in/15cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Red

Includes

1 x HK200 Hot Knife Cutter
1 x Tool Box
1 x 6in/15cm Straight Blade
1 x Large Slotted Plate
1 x 12in/30cm Bendable Blade
1 x Wrench
1 x Copper Brush
1 x Instruction Manual

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 5 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Large Foam Grooving Hot Knife Kit – HK200G appeared first on Cutdome™ Hot Knife.