The electric foam carving pen will heat up in seconds. It cuts the styrofoam smoothly and quickly, seals the edges clean, and leaves no debris! You can cut the board or foam block from any angle and choose the shape you want. Made of high-quality materials, durable, environmentally friendly and long life. This electric foam cutter is designed to easily cut foam-like materials such as styrofoam foam benzene board pearl cotton KT plate. It is an indispensable tool for cutting and engraving foams.
The electric foam carving pen with an insulated, non-slip silicone handle, so you can get a full grip and won’t get the strain for large projects. The cutting pen/needle/rod is sturdy and very secure in the base, and the foam cutter doesn’t bend much even carving through large pieces of styrofoam. This heat cutter can be heated continuously for 8 hours, which is works longer than the normal foam cutter. Note: It cannot be cut with force, it is easy to break the cutter head.
Ideal for low-density styrofoam cutting, handmade practice, advertising word making. The maximum temperature of the heat pipe is around 300 degrees, mainly used for cutting low-density foam (7-8kg/m), punching, carving, but can not cut plastic, sponge, and other materials with very high melting point. The heating tube cannot be bent and truncated. If you cut the material is high-density foam, low-density sponge, nylon rope, etc, Recommended that you buy an electric hot knife cutter.
Input Voltage: 110V-240V
Blade Material: Stainless Steel
Wand Style Blade Length: 2in/5cm, 5in/13cm, 8in/20cm
Bow Style Blade Width: 6in/15cm
Wand Style Blade Diameter: 0.08in/0.2cm
Operating Temperature: 30-300 ℃/86-570°F
1 x Cutter Holder
1 x Bow Hot Blade
1 x 2in/5cm Blade
1 x 5in/13cm Blade
1 x 8in/20cm Blade
1 x 787in/20cm Heating Wire Φ0.008in/0.2mm
1 x Electronic Transformer Adapter