Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA and so on.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 2in/5cm
Straight Blade Length: 4in/10cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Red

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Includes

1 x Hot Knife Cutter 150W
1 x Straight Blade 4in/10cm
1 x Small Slotted Plate
1 x 12in/30cm Bendable Blade*
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

Notice: You need to cut the 12in/30cm blade into two 6in/15cm sections to use. 

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 5 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Small Foam Grooving Hot Knife Kit – HK150G appeared first on Cutdome™ Hot Knife.

Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA and so on.

Self-scaling, free adjustment, no other assistance, slotting width of up to 6in/15cm, with a bendable blade you can open any shape of the slot. Power saving and easy to operate and special for foam slotting, long life span, no rough burr after cutting. The blade can be bent into any shape.

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 200W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 6in/15cm
Straight Blade Length: 6in/15cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Red

Includes

1 x HK200 Hot Knife Cutter
1 x Tool Box
1 x 6in/15cm Straight Blade
1 x Large Slotted Plate
1 x 12in/30cm Bendable Blade
1 x Wrench
1 x Copper Brush
1 x Instruction Manual

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 5 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Large Foam Grooving Hot Knife Kit – HK200G appeared first on Cutdome™ Hot Knife.

24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA, and so on.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 2in/5cm
Straight Blade Length: 4in/10cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Blue

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Includes

1 x Air Cooled Hot Knife Cutter 150W
1 x Straight Blade 10cm/4in
1 x Small Slotted Plate
1 x Bendable Blade 12in/30cm*
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

*Notice: You need to cut the 12in/30cm blade into two 6in/15cm sections to use. 

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 60 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Small Foam Grooving Air Cooled Hot Knife Kit – HKC150G appeared first on Cutdome™ Hot Knife.

24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. Lightweight and fine cutting edge. Cutting different density foams. It can easily make different groove shapes (Circular groove, Square groove, V groove, triangular groove) on the foam board, insulation board, plastic extruded board, EVA, and so on.

Self-scaling, free adjustment, no other assistance, slotting width of up to 6in/15cm, with a bendable blade you can open any shape of the slot. Power saving and easy to operate and special for foam slotting, long life span, no rough burr after cutting. The blade can be bent into any shape.

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 200W
Input Voltage: 110V-120V and 220-240V optional
Blade Material: alloy
Maximum width of slotting: 6in/15cm
Straight Blade Length: 6in/15cm
Bendable Blade Length: 12in/30cm
Change Blade Way: Nut type
Operating Temperature: 50-500 ℃
Color: Blue

Includes

1 x Air Cooled Hot Knife Cutter 200W
1 x Straight Blade 6in/15cm
1 x Large Slotted Plate
1 x 12in/30cm Bendable Blade
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Hot knives may overheat, in case of overheating turn off the machine and let it cool down to avoid damage to the lades. After 60 minutes of work let the blades cool down for 10 seconds. For more information, please read the instruction manual.

PDF

The post Large Foam Grooving Air Cooled Hot Knife Kit – HKC200G appeared first on Cutdome™ Hot Knife.