1. Continuous Heating: 24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. When used for a long time, the hot cutter can dissipate heat by air cooling, effectively reducing the damage caused by overheating and prolonging its service life.
2. Rapid: 50-500℃ in second cut and shape all foam easily!
3. Light: Suitable weight for you to operate, fit for DIY or workers
4. Smooth: There will be no rough edges after cutting, easy to install and run!
5. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
6. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 200W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Suitable Blade Length: 6in/15cm
Width: 0.55in/1.4cm
Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Blue

Includes

1 x Air Cooled Hot Knife Cutter 200W
1 x Straight Blade 6in/15cm
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Please read the instruction manual before use.

PDF

The post 6 Inch Air Cooled Hot Knife Cutter 200W – HKC200 appeared first on Cutdome™ Hot Knife.

1. Continuous Heating: 24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. When used for a long time, the hot cutter can dissipate heat by air cooling, effectively reducing the damage caused by overheating and prolonging its service life.
2. Rapid: 50-500℃ in second cut and shape all foam easily!
3. Light: Suitable weight for you to operate, fit for DIY or workers
4. Smooth: There will be no rough edges after cutting, easy to install and run!
5. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
6. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 150W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Suitable Blade Length: 4in/10cm
Blade Width: 0.55in/1.4cm
Blade Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Blue

Includes

1 x Air Cooled Hot Knife Cutter 150W
1 x Straight Blade 4in/10cm
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Please read the instruction manual before use.

PDF

The post 4 Inch Air Cooled Hot Knife Cutter 150W – HKC150 appeared first on Cutdome™ Hot Knife.

Features

1. Continuous Heating: 24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. When used for a long time, the hot cutter can dissipate heat by air cooling, effectively reducing the damage caused by overheating and prolonging its service life.
2. Rapid: 50-500℃ in second cut and shape all foam easily!
3. Light: Suitable weight for you to operate, fit for DIY or workers
4. Smooth: There will be no rough edges after cutting, easy to install and run!
5. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
6. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation

Application

Suitable for cutting foam, low-density sponge, pearl cotton, chemical fiber fabric, etc. Uses include cutting fabric, cutting round cable, cutting plastic, cleaning rubber, cutting foam, cutting sponge.

Specification

Power: 100W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Blade Length: 2in/5cm
Blade Width: 0.55in/1.4cm
Blade Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Blue

Suitable Blades

Different power hot knife fits different blades. Otherwise, wrong fitting is easy to cause hot knife being broken. If you are not sure how to fit, kindly contact us, please!

Arc-Shaped Blade, R-Shaped Blade, Shovel-Shaped Blade, Sharp-Shaped Blade, Pro Fabric Cutting Blade w/ Cutting Foot

Includes

1 x Air Cooled Hot Knife Cutter 100W
1 x Straight Blade 2in/5cm
1 x Allen Key
1 x Brass Brush
1 x Tool Box
1 x Instruction Manual

Instruction Manual

Please read the instruction manual before use.

PDF

The post 2 Inch Air Cooled Hot Knife Cutter 100W – HKC100 appeared first on Cutdome™ Hot Knife.

1. Continuous Heating: 24 hours continuous use, dual fan cooling. Can continuous heating, no cooling cycle required. When used for a long time, the hot cutter can dissipate heat by air cooling, effectively reducing the damage caused by overheating and prolonging its service life.
2. Rapid: 50-500℃ in second cut and shape all foam easily!
3. Light: Suitable weight for you to operate, fit for DIY or workers
4. Smooth: There will be no rough edges after cutting, easy to install and run!
5. Infinitely adjustable temperature: Different temperatures can be adjusted according to different materials to achieve the best results, need no skills and you can accomplish all complex models!
6. High-Temperature Resistant: Alloy blade with pure copper blade holder, with high temperature resistance, hard strength, and not easy to deformation.

Application

Suitable for cutting foam, foam sculpture, foam slotting, cutting various sponges, cutting KT board, cutting insulation board.

Specification

Power: 250W
Input Voltage: 110V-120V and 220-240V optional
Operating Temperature: 50-500 ℃
Blade Material: alloy
Blade Length: 10in/25cm
Blade Width: 0.55in/1.4cm
Blade Thickness: 0.03in/0.08cm
Change Blade Way: Nut type
Power cord: 118in/3m
Color: Blue

Includes

1 x Air Cooled Hot Knife Cutter 250W
1 x Straight Blade 10in/25cm
1 x Allen Key
1 x Brass Brush
1 x Portable Carrying Case
1 x Instruction Manual

Instruction Manual

Please read the instruction manual before use.

PDF

The post 10 Inch Air Cooled Hot Knife Cutter 250W – HKC250 appeared first on Cutdome™ Hot Knife.